Installation Guide
Easy DIY installation for all our blinds
What You'll Need
- Power drill with appropriate drill bits
- Screwdriver (Phillips head)
- Pencil
- Spirit level
- Tape measure
- Step ladder (if needed)
Recess Fitting (Inside the Window Frame)
1
Mark Bracket Positions
Hold the headrail in position at the top of the recess. Mark the screw holes for each bracket, ensuring they are level.
2
Drill Pilot Holes
Drill pilot holes at your marked positions. If drilling into masonry, use wall plugs for secure fixing.
3
Attach Brackets
Screw the brackets into place, making sure they are secure and level.
4
Clip in the Blind
Slide or clip the headrail into the brackets according to your blind type. Test the operation.
Face Fitting (Outside the Window Frame)
1
Mark Bracket Positions
Hold the headrail against the wall above the window. Mark the bracket positions, ensuring they are level and at least 50mm above the window frame.
2
Drill and Fix
Drill pilot holes and insert wall plugs if needed. Screw the brackets in place.
3
Attach the Blind
Attach the headrail to the brackets and test the operation. Adjust if necessary.
Installation Tips
- Always use a spirit level to ensure your brackets are straight
- For brick or concrete, use wall plugs for a secure fixing
- Test the blind operation before finishing
- Keep the instruction sheet for future reference